Ariens APEX 60″ Zero-Turn Mower | 24HP Kawasaki FR730 V-Twin

Ariens APEX 60-Inch Zero-Turn Mower with 24HP Kawasaki FR730 V-Twin Engine

The Ariens APEX 60-inch zero-turn mower is built for property owners who require maximum cutting width, a high-output commercial-influenced engine, and heavy-duty deck construction for efficient and reliable mowing on large residential properties, hobby farms, and estate-sized lawns requiring frequent and thorough maintenance. Powered by a 24HP Kawasaki FR730 V-Twin engine, the APEX 60 delivers consistent torque and stable power output across demanding mowing conditions including thick grass, varied terrain, and extended continuous operation on properties of multiple acres. The Kawasaki FR730 is part of the FR series commercial-influenced engine lineup, incorporating a pressurized lubrication system, cast iron cylinder liner, heavy-duty air filtration, and internal component specifications designed for sustained and frequent operation over an extended service life that exceeds standard residential engine alternatives. Ariens is an established manufacturer in the outdoor power equipment market with a reputation for heavy-duty construction standards and a parts and service network across the United States supporting long-term ownership throughout the machine’s service life.

60-Inch ENVY Fabricated Steel Deck

The 60-inch ENVY deck is fabricated from 10-gauge steel with a reinforced leading edge, providing the maximum available cutting width in the APEX series and a construction standard designed for sustained heavy-duty mowing across multiple seasons of regular use. At 60 inches of cutting width, the ENVY deck covers the widest possible swath per pass in the APEX lineup, reducing the total number of passes required to complete a session on large open properties and producing a proportional reduction in total mowing time that compounds significantly across repeated sessions throughout the season. On properties of two or more acres with open sections suitable for wide-deck mowing, the 60-inch configuration produces the most efficient mowing pattern available in the APEX range. The 10-gauge fabricated construction provides significantly greater structural rigidity and resistance to impact damage and deformation compared to lighter stamped deck alternatives, maintaining consistent blade alignment and deck geometry across the full 60-inch cutting width under repeated operational stress over extended periods of use. The reinforced leading edge adds additional protection against wear and impact damage at the forward edge of the deck where ground contact is most frequent. The deck delivers a consistent and even cut across its full width on each pass under normal to demanding mowing conditions, producing a uniform finish on varied grass types at the operator’s selected cutting height. Deck height is adjustable throughout the ownership period.

24HP Kawasaki FR730 V-Twin Engine

The Kawasaki FR730 is a 726cc V-Twin engine from the FR commercial-influenced series, providing 24HP of consistent power output matched to the demands of a 60-inch 10-gauge fabricated deck under demanding mowing conditions. The FR730 incorporates a pressurized lubrication system that actively circulates oil to engine bearings and moving components during operation, providing more consistent lubrication than splash-type systems under varied operating orientations and demanding load conditions. This pressurized system contributes to reduced internal wear over the engine’s service life and supports reliable operation under the sustained high-load conditions associated with driving a 60-inch deck through demanding grass. The cast iron cylinder liner supports longer service intervals and extended engine life under frequent use compared to aluminum-bore alternatives. The heavy-duty air filtration system provides extended service intervals between air filter maintenance and protects internal engine components from airborne debris during mowing. At 24HP, the FR730 provides a meaningful power margin above the minimum required for a 60-inch deck, supporting consistent blade speed through demanding grass conditions without performance loss under sustained load. Routine maintenance is supported by accessible service points and Kawasaki’s established parts and service network across the country.

Hydro-Gear ZT-3100 Transmission System

The APEX 60 is equipped with dual Hydro-Gear ZT-3100 transaxle units, providing commercial-grade hydrostatic transmission performance for smooth and responsive speed and direction control through the lap bar system. The ZT-3100 units are widely used in professional and semi-commercial zero-turn mowers and deliver reliable drivetrain performance under the sustained operational demands of a 60-inch deck machine used frequently on large properties. The independent transaxles provide direct and precise control of each drive wheel separately, supporting accurate zero-turn maneuvering and consistent ground speed management throughout the mowing session.

Frame Construction and Machine Features

The APEX 60 is built on a tubular steel frame designed to support the combined operational demands of a 60-inch 10-gauge deck, a 24HP FR-series engine, and dual ZT-3100 transaxles across regular and frequent mowing use on large properties. The frame construction reflects Ariens’ build standard for the APEX series, which is positioned to bridge residential and professional-grade zero-turn equipment in terms of frame weight, component specification, and operational durability. The machine includes LED headlights for extended mowing capability in lower-light conditions and a 5.1-gallon fuel tank supporting extended sessions on large properties without refueling interruptions. The high-back padded seat with adjustable armrests is designed to support operator comfort during extended mowing sessions, and the overall operator platform provides stable and controlled machine behavior on varied terrain across large properties.

Zero-Turn Steering and Field Efficiency

The zero-turn steering system on the APEX 60 provides near-zero turning radius capability in all directions through the dual ZT-3100 transmission units, enabling precise navigation around trees, fence lines, garden structures, and other obstacles across large properties. On a 60-inch deck machine, the combination of maximum cutting width and zero-turn steering produces the most efficient possible mowing pattern on large open properties, minimizing unproductive travel time and maximizing the proportion of each session spent actively cutting. The lap bar controls provide direct and responsive management of each drive wheel at all operating speeds, supporting precise maneuvering near obstacles as well as efficient straight-line mowing on open sections.

Specifications

Engine: Kawasaki FR730 V-Twin, 24HP, 726cc, Pressurized Lubrication Cutting Width: 60 inches
Deck Construction: 10-Gauge ENVY Fabricated Steel with Reinforced Leading Edge
Transmission: Hydro-Gear ZT-3100 Dual Transaxles
Fuel Tank Capacity: 5.1 Gallons
Additional Features: LED Headlights, High-Back Padded Seat with Adjustable Armrests
Warranty: 4 Years or 300 Hours
Ideal For: Large residential properties and estates of two or more acres, frequent mowing requiring maximum deck coverage and commercial-influenced engine durability, operators bridging residential and professional-grade zero-turn performance requirements

What Is Included

This listing includes the Ariens APEX 60-inch zero-turn mower as described. Please review the full product specifications and warranty details before purchase. For questions about shipping, delivery timeframes, or product information, contact our support team directly.