Cub Cadet XT1 LT50 FAB 50″ Riding Lawn Tractor | 24HP Kohler V-Twin
Original price was: $2,999.00.$1,799.00Current price is: $1,799.00.
🔴 Only 2 left in stock — order soon
🔴 Only 2 left in stock — order soon
Payment Methods:
Payment Security Notice
For larger purchases, your bank may require additional verification. If your payment is declined or doesn’t go through, please contact your bank to approve the charge and try again.
Cub Cadet XT1 LT50 FAB 50-Inch Riding Lawn Tractor with 24HP Kohler V-Twin Engine and Fabricated Deck
The Cub Cadet XT1 LT50 FAB is a 50-inch riding lawn tractor designed for homeowners with medium to large residential properties who want wide cutting coverage, a high-output V-Twin engine, and the structural advantages of a fabricated steel deck in a conventional steering riding tractor configuration. Powered by a 24HP Kohler V-Twin engine, the XT1 LT50 FAB delivers consistent torque and balanced power output across standard to moderately demanding residential mowing conditions on properties of one to two and a half acres. The FAB designation identifies the fabricated steel deck construction that distinguishes this model from stamped deck alternatives in the XT1 lineup, with the fabricated deck providing greater structural rigidity and long-term dimensional stability under regular operational stress. The XT1 LT50 FAB represents the top configuration in the Cub Cadet XT1 Enduro Series riding tractor range, combining the widest available deck in that series at 50 inches with a 24HP Kohler V-Twin engine and a fabricated deck for operators who require the maximum available cutting width and construction quality within the conventional riding tractor format.
50-Inch Fabricated Steel Deck
The 50-inch fabricated steel deck is the defining feature of the LT50 FAB and the primary distinction that positions this model above the stamped deck configurations in the XT1 lineup. The fabricated construction uses individual welded steel components rather than a single pressed sheet, resulting in a deck with greater structural rigidity, wall thickness, and resistance to deformation and impact damage under regular operational stress. This construction maintains consistent blade alignment and cutting height geometry across the full 50-inch cutting width over extended periods of regular seasonal use, supporting reliable cut quality throughout the service life of the machine in a way that stamped decks of similar width may not sustain under the same frequency of use. At 50 inches of cutting width, the deck covers substantially more ground per pass than the 42-inch or 46-inch XT1 configurations, reducing the total number of passes required to complete a mowing session on medium to large properties and shortening overall session time on properties of one acre or more where the additional cutting width produces a meaningful efficiency improvement. The deck delivers a consistent and even cut across its full 50-inch width on each pass under normal residential mowing conditions, producing a uniform finish on standard turf types at the operator’s selected cutting height. Deck height is adjustable to accommodate different grass types and seasonal mowing requirements, and the deck supports mulching and side discharge configurations for clipping management throughout the ownership period.
24HP Kohler V-Twin Engine
The 24HP Kohler V-Twin engine provides consistent and balanced power delivery from two cylinders matched to the operational demands of a 50-inch fabricated deck under standard to moderately demanding residential mowing conditions. The V-Twin configuration delivers balanced power output from two cylinders, reducing engine vibration and contributing to a smoother operating experience during extended mowing sessions on larger properties. At 24HP, the engine provides the power required to drive a 50-inch fabricated deck at full blade speed through standard to moderately thick grass without performance loss under sustained load, with a practical power margin that supports consistent blade speed when conditions become more demanding due to grass height, density, or moisture content. The Kohler V-Twin platform delivers reliable starting performance across seasonal temperature ranges and consistent operation throughout the mowing season with routine maintenance at standard service intervals. The engine is designed with accessible service points for oil changes, air filter replacement, and spark plug service, and Kohler’s established dealer and independent supplier network across the United States ensures parts availability and service support throughout the ownership period.
XT1 Enduro Series Top Configuration
The XT1 LT50 FAB occupies the top position in the Cub Cadet XT1 Enduro Series riding tractor range, combining the widest available deck at 50 inches, the highest engine output in the series at 24HP Kohler V-Twin, and the fabricated deck construction standard that represents the highest deck build quality available in the XT1 lineup. This combination positions the LT50 FAB as the most capable configuration in the XT1 Enduro Series for operators who need maximum cutting width, high engine output, and durable deck construction within the conventional steering riding tractor format. The machine is built on a cast iron front axle frame designed to support the operational demands of a 50-inch fabricated deck and a 24HP engine across regular and frequent seasonal use on medium to large properties.
Hydrostatic Transmission and Conventional Steering
The XT1 LT50 FAB uses a hydrostatic transmission that provides smooth and continuous speed control through foot pedal operation without manual gear shifting, allowing the operator to adjust ground speed naturally in response to terrain changes and maneuvering requirements throughout the mowing session. The hydrostatic system supports smooth speed transitions during both efficient straight-line mowing on open sections and slower controlled maneuvering near obstacles, removing the need for manual gear management. The conventional steering wheel provides familiar and intuitive directional control, making the LT50 FAB an accessible top-specification option for operators who want maximum XT1 series cutting width and engine output within the conventional riding tractor steering format.
Specifications
Engine: Kohler V-Twin, 24HP
Cutting Width: 50 inches
Deck Construction: Fabricated Steel
Machine Type: Riding Lawn Tractor
Transmission: Hydrostatic, foot pedal controlled
Steering: Conventional Steering Wheel
Front Axle: Cast Iron
Series: XT1 Enduro
Warranty: 3 Years
Ideal For: Medium to large residential properties of 1 to 2.5 acres, operators seeking the widest deck and highest engine output in the Cub Cadet XT1 Enduro Series with fabricated deck construction
What Is Included
This listing includes the Cub Cadet XT1 LT50 FAB 50-inch riding lawn tractor as described. Please review the full product specifications and warranty details before purchase. For questions about shipping, delivery timeframes, or product information, contact our support team directly.
Shipping
Orders typically arrive within 8–12 business days of purchase, whether you’re ordering a small part or a full-size mower or tractor. As soon as your order ships, you’ll receive a confirmation email with carrier tracking information so you can follow its progress.
Small parts and accessories ship via standard ground carrier and are delivered directly to your door. Mowers, tractors, and other large equipment ship via freight carrier with curbside delivery — the carrier will contact you to schedule a delivery window, and the unit will be unloaded at the curb or the end of your driveway.
We currently ship to all 48 contiguous U.S. states. We’re unable to ship to Alaska, Hawaii, Puerto Rico, other U.S. territories, or international addresses at this time.
Free shipping is included on every order — no coupon code or minimum purchase required. Need it faster? Contact our support team before placing your order and we’ll let you know what expedited options are available.
For full details, see our Shipping Policy.
Returns
Parts, accessories, and large equipment such as mowers and tractors can all be returned within 90 days of delivery. Items must be unused and in their original packaging or condition to qualify, and standard items should include your order number or proof of purchase.
Because large equipment ships via freight, returns are arranged through our support team — please don’t attempt to ship equipment back on your own. Our team will schedule a freight pickup and walk you through preparing the unit for return.
Return shipping costs, including freight carrier fees, are the customer’s responsibility unless the item arrived damaged or defective, in which case we cover the cost.
Once we receive and inspect your return, approved refunds are issued to your original payment method — typically within 5–7 business days for standard items and 7–10 business days for large equipment, since freight returns require a physical inspection before approval.
If an item arrives damaged or defective, contact us within 48 hours of delivery and we’ll arrange a repair, replacement, or refund at no cost to you — no return shipping required.
Need to cancel an order instead? Contact us before it ships and we can usually cancel at no charge; see our Cancellation Policy for details.
For full details, see our Refund and Returns Policy.
Why Choose Us
- Authorized dealer. Nasminc is an authorized dealer for every brand we carry, so you’re covered by the full manufacturer warranty from day one.
- Trusted brands. We carry established names in lawn and garden equipment — AGT Industrial, Ariens, Bad Boy Mowers, Cub Cadet, Husqvarna, MachPro, Toro, Typhon, and Yard Force — not off-brand imports.
- Free shipping, every order. Every order ships free with no minimum purchase required, whether it’s a small part or a full-size mower.
- Real support. Reach our team directly by phone or email with questions before or after your purchase — we’re a small team that actually answers, and we’ll handle manufacturer warranty claims on your behalf.
- Straightforward policies. Clear shipping, warranty, and 90-day return terms with no fine-print surprises.
- Secure checkout. Pay with confidence using Visa, Mastercard, American Express, Discover, Google Pay, Shop Pay, or Apple Pay.
Sales Tax
The price shown for this product is the total price you pay at checkout — we do not currently charge sales tax on orders placed through this website.
Sales tax requirements can vary by state and may change over time as tax laws evolve, so this is subject to change without notice as our obligations change in different states. If sales tax ever applies to your order, it will be clearly itemized at checkout before you complete your purchase, and you’ll always see the final total before confirming.
If you have questions about your order total or how a specific state’s tax rules might apply, contact us and we’ll be happy to help.
Brands We Trust
We carry equipment from the industry’s most trusted manufacturers.
